October Art Shows

Yesterday I setup two art shows in Spokane for the month of October. Both The Blue Door Theater and Giant Nerd Books are going to have my Horror Icons silkscreen posters on display! I was very excited to have this opportunity, it has been maybe seven years since my last art show for myself. This is also the first time I have had my silkscreen work exhibited anywhere. Most art shows I've done were of my acrylic work.

Browse through the walls displaying my art at Blue Door Theater, and the latter half of the photos are process pics at the screen printing press. Yes, I hand made the silkscreen press!

Silkscreen Postcards of Universal Monsters

Been working like a madman on a series of silkscreen postcards. The initial cards were drawn by hand, but finally got cozy behind my Monoprice digital drawing tablet, so the latest three are completely digital.

Three down, three left for the new series of six. I really want to work this series more than the previous three (Werewolf of London, Bride of Frankenstein, Nosferatu). The last ones were awfully plain. This time I'm pumping up the background with scenes of London, a full moon night, and a creepy dark castle.

What’s next? Frankenstein for sure. The Creature from the Black Lagoon, aka Gillman, Imhotep the Mummy, maybe Phantom of the Opera. From there I may have to do the more obscure or later era monsters like The Amazing Colossal Man, the 50 Foot Woman, and The Metaluna Mutant (This Island Earth). From there I may finally jump the pond and do Hammer Horror.

The final art will be printed six cards on 12x12 chipboard via silkscreen printmaking. Then I'll cut the cards to separate them. Previous runs I've done them individually and damn that's a nauseating pain in the butt. This will be much faster knocking out six cards at a time.

The current run of four are available on my Etsy Shop! Dracula, Wolfman, Invisible Man will be ready when I finish three more and get time to screen print.

 

The Great Wave off Kanagawa

This is the Great Wave, a famous Japanese artwork. It’s a woodcut print. The creator had to chisel each wood block to perfectly line up on each other for each layer of color. It was ten colors total. This makes me happy I do silkscreen.
By the way, the worst part of only seeing photographs and reproductions of famous works is not knowing the deal scope and dimensions of a piece. You don’t get to experience the varying thickness of paint on a Rembrandt, or the massive size of David, or how small The Great Wave of Kanagawa or Mona Lisa is.
printmaking.
When I was introduced to The Great Wave as a child, I imagined Hokusai slaving away at ten giant three foot x by four foot wood blocks. Nope, it's really just about 10"x14", a manageable size if you ask me. The smaller size tastes nothing away from the mastery of the works though. Bigger doesn't always mean better.

Support Living Artists T-Shirt and Screen Printing

Just finished printing off another silkscreen t-shirt for my Etsy Shop. This “Support Living Artists” shirt is flying off to Maine.

I thought some people curious about screen printing might like a peek at the process behind it. The press here is a home made four color press, but I’m only using one color for this tee.
If you’d like your own Support Living Artists t-shirt, you can buy one from my Etsy Shop: http://www.etsy.com/shop/jacosta Only $10 in the US.

30 Days Comics Challenge Day 3 Jack O' Lantern History

Just recently heard about the 30 Days Comcis challenge on twitter and tumblr. This is what I was able to throw together today. I've been down with a cold all weekend, so I drew this on and off between naps. I feel better now, and I'm fairly pleased with the coloring.

Not sure I'll be able to do one every day, but I'll do my best. Also, still working out some kinks in screen printing. Found my transparencies weren't 100% against the emulsion coated silkscreen, so the images are slightly warped and inconsistent for a four color job. Bought some glass to lay on top of the screen while it burns, allowing gravity to fix the trick. That means starting over. Also, I learned that if I am to do silkscreening, I need to work fast with emulsion. My last batch expired after a month or so after mixing with the sensitizer. This just means having to plans three projects at a time, making screens, and setting them aside until I'm ready. So far using just Speedball Diazo emulsion. If there is a longer lasting product, please let me know!

I'm also getting back to my mini comic. I have four pages penciled, and only one digitally inked. I need to hop on it, I want to get some mini comics and zines finished for the next show.

Make Your Own Quality Screen Printing Frames For Cheap

To make your own screen printing frames, you’ll need a few items:

• Wood Glue
• Staple Gun
• .125” diameter Screen Door Spline
• Screen Door Spline Tool
• At least two clamps
• Silkscreen Mesh
• Balusters

Screen Door Spline

Screen Door Spline Tool

Wood Balusters

Finished Silkscreen Frame

Tools and complete silkscreen frame without mesh

To begin with, the most vital pieces are the balusters. They are the four sides of your silkscreen frame. If you look at the diagram illustration, they are 1 1/8”x1 1/8” pieces of wood with 45 degree cuts at the sides, and a .5” cut 1/8” wide down the middle of the baluster. If you have some carpentry tools, these can easily be made for very cheap. If not, you can buy the balusters at Blick Art Studio. Blick Balusters are also cheaper than buying a premade frame, but making your own is ideal. Remember when making them that you need the top and bottom the same size baluster and the left and right side also need to be the same size.
Put the four sides together to see how they will fit, and then take wood glue and join one corner. Then use a clamp to hold them tightly together over night. You should have two pieces left, I suggest joining these with glue and a clamp too. You will have two separate L shapes now drying overnight. The next day take the two Ls and join the last two corners with glue and clamps so it creates a square frame. Let that dry overnight again. Finally take a staple gun and staple the seams on both sides of the frame for extra sturdiness. Be sure not to cover the cord groove with a staple.

Now that you have a frame you will need to attach the mesh. I suggest buying .125” screen door spline from a hardware store, and a screen door spline applicator. They should both be at the same place in the hardware store. The tool looks like a pizza cutter. Then you need to lay your silkscreen mesh on top of the screen and cut it with about an 1” extra on each side. From here, I suggest using clamps to hold the mesh against the frame on the opposite end you’ll be working with, and gently push the screen door cord into the first corner of the frame’s groove and work your first side down. Just push enough in so it won’t come out. Keep working around your screen until the cord is completely in and cut the cord to keep the rest for another screen. Then take the applicator and push the cord all the way in. This will really tighten the mesh against the frame. You want your mesh as taught as possible. At this point, you should have some extra mesh hanging out, just trim it down. Your screen just needs a washing with water and dish soap, and left to air dry after towel drying. This removed any manufacturing oils from the screen that won’t react well with your emulsion.

If you have any questions, feel free to email me! jesse.acosta@gmail.com

After gluing one pair of balusters, use clamps to keep them tightly together as they dry.

Align your balusters before gluing to see how you will glue it.

If you choose to cut your own wood balusters, these are the dimensions.

Clamp the mesh against the screen to start attaching the mesh.

Begin rolling from one corner with the tool, but don't push too tightly.

The corners are the hardest part.

Now that you are all the way around, cut the cord, and push it all the way in.

Now that the cord is all the way in and the screen is tight, cut the excess mesh.

A complete silkscreen frame with mesh. Just needs to have the mesh trimmed on the edges.

Halloween Art and Comics!

I haven't had much time to write a decent blog entry in a while, but I've been actively at work. If you follow me on tumblr or instagram, I am a little more frequent about posts simply because I can share just images and photos of my projects.

Right now I am trying to do four things. 1) Prepare to teach a silkscreen workshop 2) write a silkscreen zine guide 3) Writing a El Gran Búho lucha-halloween comic 4) A Boris Karloff Mummy limited edition silkscreen print

Right now I'm building the silkscreen frames from scratch, and just recently worked with my father to build a four color silkscreen press based on plans from http://www.printingplans.com/. My silkscreen project will be three colors: black, dark brown, and light brown on an offwhite "taupe" heavyweight paper. Here are some pictures of the project:

 These are my three silkscreen layers of ink.

This is a mockup of what it will look light when I am done.

I'm pretty excited about this project, can't wait to photograph the silkscreen process for you, and get the final product up in my etsy shop.

I'm also finishing up a couple things for my Etsy shop as well. I need new business cards, plus I want to put a giveaway postcard of my art in each Etsy order. Here's my illustration so far for that postcard:

Now regarding the comic, here's what I have so far:

As you can see, I'm fairly busy running around like a headless chicken. Halloween is so much fun, I love the movies, candy, monster cereal, and everything else that just makes this time of year so special. I'll be posting next week when I complete the silkscreen project, then hopefully I can jump on that mini comic and get it done before the 31st!